Smart Track Hybrid Foil Long Pin Rudder Rear Assembly

SmartTrack Hybrid Foil Rudder is a flip over the deck Rudder Housing and Foil.   Ideal as a replacement on older kayaks when a customer prefers a more traditional look.  The foil blade is available in two lengths either Single or Tandem. This is the standard length not the tandem version. The Foil shaped blade has the hydro efficiency for which SmartTrack is known.  Available in three mounts to match a variety of different kayaks- Bayonet Pin, Mid Pin and this the Long Pin. SmartTrack Long Pin is suitable for kayaks with an extension or a vertical hole all the way through the rear of the kayak so you can use a split ring pin on the bottom of the shaft to hold it in position. 3 holes allow for the split pin to be secured at the correct level for your mount. Replacement Springs are available but blade and mount are not sold separately at this time. Mounts on the vertical surface of the stern Pin diameter 3/8″ x 3 5/8″ long Comes with Rudder Blade Housing Smart Track THS kit for attaching cable Uphaul line- to raise rudder (optional to fit) Cleat for Uphaul line Fairlead for uphaul line Mounting hardware Nuts and bolts etc for uphaul line There are a fair number of different Smart Track Rudder Options- if you replacing a damaged version it is safest to use the same model. Model names should be written on the rudder housing (making it easy to figure out) but if that is worn or if you are not sure here is an explainer of the different options and models. MPN: 3890