Effectively removes dirt, rust, and deposited salts, urine residues, as well as the odors caused by them. Also suitable for cleaning copper, brass, bronze, and stainless steel surfaces, as well as for removing limescale from shower heads and other surfaces. USAGE Daily maintenance of tiled floors and surfaces: 5–50 ml per 5 l of water. Disinfection: dilution 1:4. Rust removal from toilet bowls and tiled surfaces: dilution from 1:4 up to concentrated use at 1:2. Removal of limescale blockages and scale from showers: dilution 1:4. Removal of dirt and odors from toilet bowls and cleaning of copper surfaces: dilution 1:4. Cleaning tile grout joints: dilution 1:3. Spray onto or apply to the surface with a sponge or brush, allow to act for 5–10 minutes, brush if necessary, then rinse with water. Working solutions are prepared by dissolving the product in water ( 20 to 40 °C). The concentrate remains stable in a closed container until the end of its shelf life; prepared solutions may be used for 24 hours. Surfaces that come into contact with food must be rinsed thoroughly. Check the effectiveness of detergent residue removal using pH paper from the final rinse water. The pH of the final rinse water must be neutral. PRECAUTIONS Observe safety precautions when handling. Contains a biocide. Read the instructions for use before application. The concentrate irritates eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if necessary. Wear suitable protective gloves. If swallowed, rinse mouth with water, drink plenty of water, and seek medical advice. COMPOSITION 100 g of product contains: benzyl-C12–18-alkyldimethyl chlorides and C12–14-alkyl[(ethylphenyl)methyl]dimethyl chlorides 1 g (active substance), orthophosphoric acid 5–15 g, anionic surfactants 5–15 g, phosphonates <5 g, complexing agents, corrosion inhibitor. Biocide registration certificate No. 0025/05. pH ≤1; working solution pH 2.0–5.0.
